home *** CD-ROM | disk | FTP | other *** search
/ Mac Power 1997 January / macpower199701.bin / AMUG / Education_15 / Mac Repair 2.0a.sit / Pheonix Mac Repair 2.0a.rsrc / TEXT_145.txt < prev    next >
Encoding:
Text File  |  1995-02-26  |  1.6 KB  |  128 lines

  1.  
  2. ツ Unusual Screens
  3.  
  4. This chapter covers unusual screen happenings. All user level repairs require an analog board change unless otherwise indicated.  See the chapter "compact Macs"  for changing the analog board.
  5.  
  6.  
  7. ツ 
  8.  
  9. Wavy lines on the screen
  10.  
  11.  
  12.  
  13.  
  14.  
  15. ツ 
  16.  
  17. The display is short
  18. (try a  vertical adjustment. See:  "Adjusting screen 
  19. size")
  20.  
  21.  
  22.  
  23.  
  24.  
  25.  
  26.  
  27. ツ 
  28. The display is narrow
  29. (try a  horizontal adjustment. See:  "Adjusting screen
  30.  size")
  31.  
  32.  
  33.  
  34.  
  35.  
  36. ツ 
  37.  
  38. Screen jittering or shimmy
  39. Replace the analog board see if the ground on a
  40.  Mac Plus is loose.  (Green ground wire on the
  41.  back edge of the analog board).
  42.  
  43.  
  44.  
  45. ツ 
  46.  
  47. The screen jitters during drive action or when 
  48. windows are open.
  49.  
  50.  
  51.  
  52.  
  53.  
  54. ツ 
  55.  
  56. Letters on the edge are stretched compared to the 
  57. center.(The wider areas could be just on one
  58.  side too.)
  59.  
  60.  
  61.  
  62.  
  63.  
  64. ツ 
  65.  
  66. Bright vertical line.
  67.  
  68.  
  69.  
  70.  
  71.  
  72.  
  73.  
  74. ツ 
  75.  
  76. Bright horizontal line
  77.  
  78.  
  79.  
  80.  
  81.  
  82.  
  83.  
  84.  
  85.  
  86. Lines or Checkerboardツ ツ 
  87. Compact Macs: the reset
  88. switch on the side of the
  89. computer is depressed.
  90. Remove or reseat it.
  91.  
  92.  
  93.  
  94.  
  95. ツ 
  96.  
  97. Display out of focus (see Compact Macs)
  98.  or a new logic board is needed
  99.  
  100.  
  101.  
  102.  
  103. Display isn't rectangular or is offツ 
  104. to the side or is tilted.
  105. Try height and width adjustments
  106. (see Compact Macs) or
  107. video neck yoke is out of adjustment.
  108. You should see a technician about 
  109. this problem
  110.  
  111.  
  112. ツ 
  113. Vertical bars and the happy Mac stays
  114. If you recently inserted RAM chips (simms)
  115. Then they are in the wrong place on the logic
  116. board of an SE or SE30.
  117.  
  118.  
  119.  
  120.  
  121. Checkerboard patternツ 
  122. One of two things:
  123. 1. Reseat the ROM simm on the logic board
  124. 2. The ROM simm is put in backward or defective
  125. Replace logic board or inquire about repair.
  126.  
  127.  
  128.